Cuplock-Scaffolding-System
Cuplock system scaffolding has been designed to meet the requirements of the construction and housing industries.
The success of cuplock scaffolding lies in its principal design features:
- Speed of assembly
- Versatility of applications
- Simplicity of components and their connection
- Elimination of loose wedges
- No special tools required for assembly (hammer and spirit level only)
- Low maintenance required to keep in top working condition -Hot dip galvanized
Standard/Vertical
Cuplock scaffolding spigotted standards are principally used in access scaffolding applications and also as a base structure for formwork support applications. They have cup joints at 500mm intervals. The captive mobile top cups are designed to endure rough site handling and welded bottom cups are made from high-quality steel. Integral spigots, 150mm long, are provided at the top of each standard for making vertical connections. The spigots and the base of each standard incorporate 16mm dia. holes to enable use of locking pins to join standards where necessary.
|
CV910 |
|
VERTICAL 9'10" (3M) - 6 CUPS |
HDG |
|
CV82 |
|
VERTICAL 8'2" (2.5M) - 5 CUPS |
HDG |
|
CV66 |
|
VERTICAL 6'6" (2M) - 4 CUPS |
HDG |
|
CV411 |
|
VERTICAL 4'11" (1.5M) - 3 CUPS |
HDG |
|
CV33 |
|
VERTICAL 3'3" (1M) - 2 CUPS |
HDG |
|
CV10 |
|
VERTICAL 1'7" (0.5M) - 1 CUP |
HDG |
Horizontal Runners
]
The Ledgers are manufactured from 48.3mm O.D. tube with forged steel blade ends which locate into bottom cups of the standards and are locked in place by the corresponding top cups. Ledgers are available in various lengths to provide the desired grid dimension for scaffolding or formwork. Production of the ledger since 1997 has been from thinner high grade steel tube. This contributes to a higher ledger for easier handling. Ledgers manufactured prior to 1997 are made from the thicker wall tube and weigh approx. 20% heavier than the weights stated below
|
CH100 |
HORIZONTAL 10' (3048MM) |
HDG |
|
CH90 |
HORIZONTAL 9' (2743.2MM) |
HDG |
|
CH82 |
HORIZONTAL 8'2" (2500MM) |
HDG |
|
CH80 |
HORIZONTAL 8' (2438.4MM) |
HDG |
|
CH70 |
HORIZONTAL 7' (2133.6MM) |
HDG |
|
CH60 |
HORIZONTAL 6' (1828.8MM) |
HDG |
|
CH511 |
HORIZONTAL 5'11" (1800MM) |
HDG |
|
CH50 |
HORIZONTAL 5' (1524MM) |
HDG |
|
CH411 |
HORIZONTAL 4'11" (1500.2MM) |
HDG |
|
CH41 |
HORIZONTAL 4'1" (1250MM) |
HDG |
|
CH40 |
HORIZONTAL 4' (1219.2MM) |
HDG |
|
CH36 |
HORIZONTAL 3'6" (1066.8MM) |
HDG |
|
CH30 |
HORIZONTAL 3' (914.4MM) |
HDG |
|
CH27 |
HORIZONTAL 2'7" (788.19MM) |
HDG |
|
CH211 |
HORIZONTAL 2'11" (900MM) |
HDG |
|
CH110 |
HORIZONTAL 1'10" (559.59MM) |
HDG |
Swival clamp brace
|
CCB100 |
CLAMP BRACE 10' BAY (3048MM) |
HDG |
|
CCB90 |
CLAMP BRACE 9' BAY (2743.2MM) |
HDG |
|
CCB86 |
CLAMP BRACE 8'6" BAY |
HDG |
|
CCB82 |
CLAMP BRACE 8'2" BAY |
HDG |
|
CCB80 |
CLAMP BRACE 8' BAY |
HDG |
|
CCB70 |
CLAMP BRACE 7' BAY |
HDG |
|
CCB60 |
CLAMP BRACE 6' BAY |
HDG |
|
CCB50 |
CLAMP BRACE 5' BAY |
HDG |
|
CCB30 |
CLAMP BRACE 3' BAY |
HDG |
Face brace
|
CFB100 |
FACE BRACE 10' (143.53" C-C) |
HDG |
|
CFB90 |
FACE BRACE 9' (133.66" C-C) |
HDG |
|
CFB82 |
FACE BRACE 8'2" (126.05" C-C) |
HDG |
|
CFB80 |
FACE BRACE 8' (124.16" C-C) |
HDG |
|
CFB70 |
FACE BRACE 7' (115.14" C-C) |
HDG |
|
CFB511 |
FACE BRACE 5'11" (105.93" C-C) |
HDG |
Board Bracket
|
CBB10 |
CUP LOCK 1 BOARD BRACKET |
|
CBB110 |
CUP LOCK 2 BOARD BRACKET |
|
CBB27 |
CUP LOCK 3 BOARD BRACKET |
|
CCF |
1.5m CANTILEVER FRAME |
Truss Brace
|
CTB210 |
21' CUP LOCK TRUSS BRACE |
HDG |
|
CTB200 |
20' CUP LOCK TRUSS BRACE |
HDG |
|
CTB180 |
18' CUP LOCK TRUSS BRACE |
HDG |
|
CTB160 |
16' CUP LOCK TRUSS BRACE |
HDG |
|
CTB140 |
14' CUP LOCK TRUSS BRACE |
HDG |
|
CTB120 |
12' CUP LOCK TRUSS BRACE |
HDG |
|
CTB100 |
10' CUP LOCK TRUSS BRACE |
HDG |
|
CTB90 |
9' CUP LOCK TRUSS BRACE |
HDG |
|
CTB82 |
8'2" CUP LOCK TRUSS BRACE |
HDG |
|
CTB80 |
8' CUP LOCK TRUSS BRACE |
HDG |
|
CTB70 |
7' CUP LOCK TRUSS BRACE |
HDG |
|
CTB60 |
6' CUP LOCK TRUSS BRACE |
HDG |
|
CTB50 |
5' CUP LOCK TRUSS BRACE |
HDG |
Intermedia transom
|
CIT40 |
4' INTERMEDIATE TRANSOM (1219.2MM) |
HDG |
|
CIT30 |
3' INTERMEDIATE TRANSOM (914.4MM) |
HDG |
Ladder & Bracket
|
CLBW |
LADDER BRACKET WITH 9" |
HDG |
|
CSLW10 |
10' STEEL LADDER (WIDTH) |
HDG |
|
CSLW5 |
5' STEEL LADDER (WIDTH) |
HDG |
|
CSLW3 |
3' STEEL LADDER (WIDTH) |
HDG |
Staircase stringer & Tread
|
CSSL80 |
CUPLOCK 8' STRINGER |
ALUM/HDG |
|
CSSL82 |
CUPLOCK 8'2" STRINGER |
ALUM/HDG |
|
CST40 |
4' STAIR TREAD |
HDG |
|
CST37 |
3'7" STAIR TREAD |
HDG |
|
CST36 |
3'6" STAIR TREAD |
HDG |
Girder
|
CLG16 |
16' CUPLOCK LATTICE GIRDER |
HDG |
|
CLG21 |
21' CUPLOCK LATTICE GIRDER |
HDG |
Base Jack
|
ASJB |
|
SCREWJACK 24" W/BASE PLATE(CUPLOK) |
ZP |
|
ASJS |
|
SCREWJACK W/SWIVEL BASE PLATE |
ZP |
|
ASJU |
|
SCREWJACK WITH HOLLOW U HEAD |
ZP |
DECK ADAPTER
|
CDA |
25" DECK ADAPTER |
HDG |
CASTER ADAPTER
|
CCA |
CASTER ADAPTER |
HDG |
EXT. ADAPTEER
|
CEA17 |
EXT. ADAPTEER 7-7/8" 200MM |
HDG |
Steel Plank
Use: Steel plank is designed to span the bay by hooking to the horizontal members of the bay providing a safe work platform.
Material: Q235
Finished: hot dip galvanized
|
Code |
DESCRIPTION |
SURFACE |
|
SSP10 |
10' STEEL PLANK 3048mm |
HDG |
|
SSP211 |
2'11" STEEL PLANK 900mm |
HDG |
|
SSP27 |
2'7" STEEL PLANK |
HDG |
|
SSP3 |
3' STEEL PLANK 914.4mm |
HDG |
|
SSP36 |
3'6" STEEL PLANK 1066.8mm |
HDG |
|
SSP4 |
4' STEEL PLANK 1219.2mm |
HDG |
|
SSP41 |
4'1" STEEL PLANK 1250mm |
HDG |
|
SSP411 |
4'11" STEEL PLANK 1500.2mm |
HDG |
|
SSP5 |
5' STEEL PLANK 1524mm |
HDG |
|
SSP511 |
5'11" STEEL PLANK 1800mm |
HDG |
|
SSP6 |
6' STEEL PLANK 1828mm |
HDG |
|
SSP7 |
7' STEEL PLANK 2133.6mm |
HDG |
|
SSP8 |
8' STEEL PLANK 2438.4mm |
HDG |
|
SSP82 |
8'2" STEEL PLANK 2500mm |
HDG |
|
SSP9 |
9' STEEL PLANK 2743.2mm |
HDG |
